Fire door ironmongery in Ayr: what's involved
We provide fire door ironmongery in Ayr (KA8 and the surrounding postcodes), from the first survey through to a documented handover.
Around Ayr, small blocks of flats, care homes and houses with integral garages all depend on fire doors that close, latch and seal. We survey each opening and tell you plainly which doors need work and which don't.
Missing hinge screws and unsuitable locks are routine findings on fire door inspections everywhere; in Ayr we replace them with hardware covered by each door's evidence. Signage for fire doors in Ayr buildings is fitted as part of the job, not as an afterthought.
Common hardware defects
Inspections regularly find missing hinge screws, mismatched hinges, plastic-bodied latches, unapproved bolts and locks fitted without intumescent protection. We replace them with items covered by the door's evidence and fit the matching pads and linings.
Each installation includes:
- Fire door signage
- Intumescent pads and lock linings
- Bolts and selectors where specified
- Fire-rated hinges, commonly grade 13
The regulations behind fire doors in Ayr
In Ayr, fire doors are specified against Scotland's Technical Handbooks (Section 2: Fire) under the Building (Scotland) Regulations 2004, rather than Approved Document B. Duties in non-domestic premises come from the Fire (Scotland) Act 2005 and the Fire Safety (Scotland) Regulations 2006.
England's regulation 10 does not apply in Scotland. We follow the building's fire risk assessment and, where building work needs a warrant, the local authority's requirements.
Where fire door ironmongery fit in Ayr
Typical settings for fire door ironmongery include blocks of flats, offices and schools. In Ayr, as anywhere, the duty holder varies: a responsible person for a workplace, a landlord or managing agent for a block or HMO, or a homeowner after building work. We adjust access, timing and paperwork to suit whoever commissions the work.
How a Ayr job runs
- Identify the door's certification and hardware schedule
- List items that need replacing
- Supply matching hardware
- Fit with correct pads and linings
- Check operation, closing and latching
- Record what was fitted
Guide prices in Ayr
Guide pricing for fire door ironmongery: from £40 for minor items to £350 for a full hardware set per door, ex VAT. Volume work across several doors in one Ayr building usually brings the per-door cost down. Your written quote is fixed once we have surveyed.
Nearby areas we cover from Ayr
Ayr is about 18.7 km from Kilmarnock, and we cover both, along with nearby Irvine and Newton Mearns. Send us your postcode and we'll confirm survey dates.
Questions
Is Ayr within your coverage area?
It is. We cover Ayr in Ayrshire and neighbouring towns such as Irvine. There is no charge for the survey.
What happens on a survey in Ayr?
We look at every door in scope: the leaf, frame, gaps, seals, hinges, closer, glazing and how the frame is fixed. You then get a written quote that prices each door separately.
Do fire doors need signs?
Most fire doors in non-domestic buildings and common parts should carry signage showing whether they are to be kept shut, kept locked or are automatic.
Can I fit a new lock to a fire door?
Only one that is covered by the door's test evidence, fitted with the correct intumescent protection. A larger lock body or new holes can compromise the door.