Getting fire door frames right in Burton upon Trent
Our fire door frames service in Burton upon Trent is simple: a survey, a fixed quote, certified products and an installation finished to the manufacturer's evidence.
Burton upon Trent has a broad mix of buildings, including care homes, industrial units and converted period houses, and the same fire door principles apply to all of them.
We photograph every frame we fix in Burton upon Trent before the architraves go on, so the hidden work is on record. Frame-to-wall gaps on Burton upon Trent jobs are sealed with materials supported by the test evidence, as BS 8214:2026 sets out.
Why frames fail inspections
Many fire door problems start with the frame: softwood linings too thin for the door, frames cut back to fit a previous door, frames loose in the wall, or gaps behind the architrave stuffed with ordinary foam or left open. A perfect leaf hung in a frame like that cannot be relied on.
On a typical job that means:
- Frame-to-wall gap sealing with evidenced materials
- Hardwood or certified frames to suit the door
- Fixing at specified centres with packing
- Architraves and making good
The regulations behind fire doors in Burton upon Trent
England's framework applies in Burton upon Trent. Approved Document B guides the fire performance of new and replacement doors under the Building Regulations 2010. Day-to-day duties sit with the responsible person under the Fire Safety Order 2005, and for multi-occupied residential buildings, the Fire Safety (England) Regulations 2022 add duties such as giving residents information about fire doors.
For blocks over 11 metres in Burton upon Trent, those regulations require communal fire door checks at least every three months and best-endeavours flat entrance door checks each year. In higher-risk buildings, building work is overseen by the Building Safety Regulator, so we check whether approval is needed before starting.
Buildings and duty holders in Burton upon Trent
Landlords, managing agents, facilities teams and homeowners in Burton upon Trent can all commission fire door frames from us. The usual settings are converted houses and older blocks of flats, though single doors for offices are just as welcome.
What happens after you enquire
- Remove architraves and inspect frame fixing
- Decide repair, re-fix or replace
- Prepare the opening and fit the frame
- Pack and fix at specified centres
- Seal the frame-to-wall gap
- Photograph, fit architraves and make good
Guide prices in Burton upon Trent
As a guide, budget £250–£600 per frame replaced, fixed and sealed, ex VAT for fire door frames. The figure for your Burton upon Trent building depends on the number of doors, the rating, the condition of the frames, finishes, hardware and access. We confirm a fixed price after the free survey.
Nearby areas we cover from Burton upon Trent
We also cover towns near Burton upon Trent, including Swadlincote (6.8 km away), Derby and Lichfield. If your building is in DE14 or a neighbouring district, the service and pricing are the same.
Questions
Do you work in Burton upon Trent?
Yes, we take on fire door frames in Burton upon Trent and the surrounding area, including Swadlincote and Derby. Send your postcode and a few details and we'll come back with survey dates.
What happens on a survey in Burton upon Trent?
We look at every door in scope: the leaf, frame, gaps, seals, hinges, closer, glazing and how the frame is fixed. You then get a written quote that prices each door separately.
Can a new frame be fitted to my existing door?
Sometimes, if the frame is compatible with the door's certification. Often it is simpler and better evidenced to replace the whole doorset.
Can I use expanding foam around a fire door frame?
Only a fire-rated foam with evidence for that use and gap size. Ordinary expanding foam is not suitable.