Fire door frames: our service in Sheffield
When you book fire door frames in Sheffield, the aim is simple: doors that close, latch and seal as tested, with records that prove it.
Around Sheffield, mixed-use office buildings, care homes and purpose-built blocks of flats all depend on fire doors that close, latch and seal. We survey each opening and tell you plainly which doors need work and which don't.
In older buildings the frame can be the weak point even where the leaf is sound, so we check it on every Sheffield survey. Frame-to-wall gaps on Sheffield jobs are sealed with materials supported by the test evidence, as BS 8214:2026 sets out.
Frames on their own
Where a leaf is sound but the frame is not, a new compatible frame can sometimes be fitted to the existing leaf, provided the combination is supported by the leaf's certification. More often, a frame replacement is part of a doorset installation.
On a typical job that means:
- Photographs of fixing and sealing before covering
- Assessment of frame condition and compatibility
- Architraves and making good
- Fixing at specified centres with packing
The regulations behind fire doors in Sheffield
The rules that apply to fire doors in Sheffield are England's. The responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire doors in non-domestic premises and the common parts of flats in working order; the Fire Safety Act 2021 confirmed that this includes flat entrance doors onto common parts.
Where a Sheffield block is above 11 metres, regulation 10 of the 2022 regulations means communal doors are checked every three months and flat entrance doors annually on a best-endeavours basis. Replacement doors must also satisfy the Building Regulations, with Approved Document B as the guidance most building control bodies work from.
Which buildings in Sheffield need fire door frames?
The need for fire door frames usually arises in converted houses or older blocks of flats, and sometimes offices. Each has its own pressures, such as residents at home or a building that must stay open, so we plan the sequence of work in Sheffield to keep escape routes protected throughout.
Our process in Sheffield
- Remove architraves and inspect frame fixing
- Decide repair, re-fix or replace
- Prepare the opening and fit the frame
- Pack and fix at specified centres
- Seal the frame-to-wall gap
- Photograph, fit architraves and make good
Budgeting for fire door frames in Sheffield
Budget around £250–£600 per frame replaced, fixed and sealed, ex VAT for fire door frames. Our guide prices are the same in Sheffield as elsewhere; what changes the cost is the doors themselves. Use our guide-price tool for a quick estimate.
Sheffield and neighbouring towns
As well as Sheffield, we cover neighbouring towns including Burngreave, Rotherham and Dronfield. The survey and quote are free.
Questions from Sheffield
Do you cover S1 and nearby postcodes?
Yes. We cover Sheffield including S1, and nearby towns such as Burngreave and Rotherham. The survey and written quote are free.
Can you work from an existing inspection report for my Sheffield building?
Yes. Send it over and we can often price straight from it, then confirm on site. We report back against the same door references so you can close actions off.
Can a new frame be fitted to my existing door?
Sometimes, if the frame is compatible with the door's certification. Often it is simpler and better evidenced to replace the whole doorset.
Can I use expanding foam around a fire door frame?
Only a fire-rated foam with evidence for that use and gap size. Ordinary expanding foam is not suitable.