Fire door frames for Nailsea buildings
Our fire door frames service in Nailsea is simple: a survey, a fixed quote, certified products and an installation finished to the manufacturer's evidence.
Fire doors in Nailsea protect escape routes in care homes, small blocks of flats and schools alike. We adapt the programme to the building and its occupants, never the standard of the installation.
In older buildings the frame can be the weak point even where the leaf is sound, so we check it on every Nailsea survey. We photograph every frame we fix in Nailsea before the architraves go on, so the hidden work is on record.
BS 8214:2026 and the frame-to-wall gap
The 2026 revision of BS 8214 strengthened its guidance on sealing the gap between the frame and the surrounding structure, listing material types such as stone wool, mastic and fire-rated foam, and putting the emphasis on using what the evidence supports. We fill and seal that gap with materials covered by the doorset's or sealant's test evidence and photograph it before the architraves go back on.
Each installation includes:
- Architraves and making good
- Assessment of frame condition and compatibility
- Photographs of fixing and sealing before covering
- Fixing at specified centres with packing
Fire door law for Nailsea properties
Fire doors in Nailsea fall under English rules. New and replacement doors are covered by the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks, the Regulatory Reform (Fire Safety) Order 2005, as clarified by the Fire Safety Act 2021, puts the duty on the responsible person to keep fire doors suitable and maintained.
For residential buildings in Nailsea above 11 metres, regulation 10 of the Fire Safety (England) Regulations 2022 adds checks: communal fire doors at least every three months and best-endeavours checks of flat entrance doors at least every twelve months. Higher-risk buildings of at least 18 metres or seven storeys also come under the Building Safety Act 2022, where works may need approval from the Building Safety Regulator.
Where fire door frames fit in Nailsea
You are most likely to need fire door frames if you look after converted houses, schools or offices. Whatever the building in Nailsea, we survey each opening and tell you which doors need work and which do not.
What happens after you enquire
- Remove architraves and inspect frame fixing
- Decide repair, re-fix or replace
- Prepare the opening and fit the frame
- Pack and fix at specified centres
- Seal the frame-to-wall gap
- Photograph, fit architraves and make good
Guide prices in Nailsea
Guide pricing for fire door frames: £250–£600 per frame replaced, fixed and sealed, ex VAT. Volume work across several doors in one Nailsea building usually brings the per-door cost down. Your written quote is fixed once we have surveyed.
Covering Nailsea and nearby
Nailsea is about 28.2 km from Bath, and we cover both, along with nearby Portishead and Clevedon. Send us your postcode and we'll confirm survey dates.
Common questions
Do you work in Nailsea?
Yes, we take on fire door frames in Nailsea and the surrounding area, including Portishead and Clevedon. Send your postcode and a few details and we'll come back with survey dates.
How quickly can you survey in Nailsea?
It depends on the number of doors and access, but we offer survey dates as soon as we reply to your enquiry. If an inspection has found urgent safety issues, tell us and we'll prioritise.
Can a new frame be fitted to my existing door?
Sometimes, if the frame is compatible with the door's certification. Often it is simpler and better evidenced to replace the whole doorset.
What is the frame-to-wall gap?
It is the space between the door frame and the surrounding wall, normally hidden by the architrave. If it is not filled with a suitable fire-resisting material, fire and smoke can pass around the door.