Getting fire door frames right in Nottingham
Our fire door frames service covers Nottingham and the wider Nottinghamshire area. Every job starts with a survey of the openings, so the quote reflects your actual doors rather than a guess.
Buildings in and around Nottingham range from purpose-built blocks of flats to care homes and student accommodation. Whatever the building, the standard is the same: certified products, correct gaps, seals and closers, and a frame sealed to the wall.
Frame-to-wall gaps on Nottingham jobs are sealed with materials supported by the test evidence, as BS 8214:2026 sets out. In older buildings the frame can be the weak point even where the leaf is sound, so we check it on every Nottingham survey.
Why frames fail inspections
Many fire door problems start with the frame: softwood linings too thin for the door, frames cut back to fit a previous door, frames loose in the wall, or gaps behind the architrave stuffed with ordinary foam or left open. A perfect leaf hung in a frame like that cannot be relied on.
What you get:
- Assessment of frame condition and compatibility
- Fixing at specified centres with packing
- Architraves and making good
- Photographs of fixing and sealing before covering
What the rules say for Nottingham
The rules that apply to fire doors in Nottingham are England's. The responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire doors in non-domestic premises and the common parts of flats in working order; the Fire Safety Act 2021 confirmed that this includes flat entrance doors onto common parts.
Where a Nottingham block is above 11 metres, regulation 10 of the 2022 regulations means communal doors are checked every three months and flat entrance doors annually on a best-endeavours basis. Replacement doors must also satisfy the Building Regulations, with Approved Document B as the guidance most building control bodies work from.
Who needs fire door frames in Nottingham?
Landlords, managing agents, facilities teams and homeowners in Nottingham can all commission fire door frames from us. The usual settings are schools and older blocks of flats, though single doors for offices are just as welcome.
The steps on a Nottingham installation
- Remove architraves and inspect frame fixing
- Decide repair, re-fix or replace
- Prepare the opening and fit the frame
- Pack and fix at specified centres
- Seal the frame-to-wall gap
- Photograph, fit architraves and make good
Budgeting for fire door frames in Nottingham
Budget around £250–£600 per frame replaced, fixed and sealed, ex VAT for fire door frames. Our guide prices are the same in Nottingham as elsewhere; what changes the cost is the doors themselves. Use our guide-price tool for a quick estimate.
Covering Nottingham and nearby
Beyond Nottingham itself we also cover nearby towns such as West Bridgford (3.1 km), Arnold and Hucknall. The service, pricing and evidence are the same wherever you are.
Questions
Is Nottingham within your coverage area?
It is. We cover Nottingham in Nottinghamshire and neighbouring towns such as West Bridgford. There is no charge for the survey.
How quickly can you survey in Nottingham?
It depends on the number of doors and access, but we offer survey dates as soon as we reply to your enquiry. If an inspection has found urgent safety issues, tell us and we'll prioritise.
Can a new frame be fitted to my existing door?
Sometimes, if the frame is compatible with the door's certification. Often it is simpler and better evidenced to replace the whole doorset.
Can I use expanding foam around a fire door frame?
Only a fire-rated foam with evidence for that use and gap size. Ordinary expanding foam is not suitable.