Fire door frames in Blyth, done to the evidence
Our fire door frames service in Blyth is simple: a survey, a fixed quote, certified products and an installation finished to the manufacturer's evidence.
Blyth has a broad mix of buildings, including care homes, schools and light industrial buildings, and the same fire door principles apply to all of them.
In older buildings the frame can be the weak point even where the leaf is sound, so we check it on every Blyth survey. We photograph every frame we fix in Blyth before the architraves go on, so the hidden work is on record.
Frames on their own
Where a leaf is sound but the frame is not, a new compatible frame can sometimes be fitted to the existing leaf, provided the combination is supported by the leaf's certification. More often, a frame replacement is part of a doorset installation.
As standard, the work covers:
- Frame-to-wall gap sealing with evidenced materials
- Hardwood or certified frames to suit the door
- Architraves and making good
- Photographs of fixing and sealing before covering
The regulations behind fire doors in Blyth
In Blyth, as elsewhere in England, the starting point is the Fire Safety Order 2005: whoever controls a workplace or the shared parts of a residential block must make sure its fire doors work. When doors are replaced, the Building Regulations and Approved Document B set the standard the new work has to meet.
Blocks above 11 metres have a specific routine under regulation 10 of the Fire Safety (England) Regulations 2022: quarterly checks of communal fire doors and annual best-endeavours checks of flat front doors. If your Blyth building is a higher-risk building under the Building Safety Act 2022, we confirm the approval route with the Principal Accountable Person before any work is ordered.
Which buildings in Blyth need fire door frames?
You are most likely to need fire door frames if you look after schools, converted houses or older blocks of flats. Whatever the building in Blyth, we survey each opening and tell you which doors need work and which do not.
How a Blyth job runs
- Remove architraves and inspect frame fixing
- Decide repair, re-fix or replace
- Prepare the opening and fit the frame
- Pack and fix at specified centres
- Seal the frame-to-wall gap
- Photograph, fit architraves and make good
What does fire door frames cost in Blyth?
If you need a budget figure first, the guide for fire door frames is £250–£600 per frame replaced, fixed and sealed, ex VAT. We firm that up after a survey, pricing each door separately so you can see where the money goes.
Blyth and neighbouring towns
As well as Blyth, we cover neighbouring towns including Ashington, Cramlington and Whitley Bay. The survey and quote are free.
Common questions
Is Blyth within your coverage area?
It is. We cover Blyth in Northumberland and neighbouring towns such as Ashington. There is no charge for the survey.
Can you work from an existing inspection report for my Blyth building?
Yes. Send it over and we can often price straight from it, then confirm on site. We report back against the same door references so you can close actions off.
Can a new frame be fitted to my existing door?
Sometimes, if the frame is compatible with the door's certification. Often it is simpler and better evidenced to replace the whole doorset.
Why do you photograph the frame before fitting architraves?
Because the fixing and sealing are hidden once the architraves go on. Photographs give you evidence that the hidden work was done correctly.