Fire door frames in Hatfield: what's involved
From the AL10 postcode district outwards, we take on fire door frames across Hatfield for homes, blocks and workplaces.
Hatfield has a broad mix of buildings, including care homes, light industrial buildings and houses with integral garages, and the same fire door principles apply to all of them.
Frame-to-wall gaps on Hatfield jobs are sealed with materials supported by the test evidence, as BS 8214:2026 sets out. In older buildings the frame can be the weak point even where the leaf is sound, so we check it on every Hatfield survey.
Frames on their own
Where a leaf is sound but the frame is not, a new compatible frame can sometimes be fitted to the existing leaf, provided the combination is supported by the leaf's certification. More often, a frame replacement is part of a doorset installation.
Each installation includes:
- Photographs of fixing and sealing before covering
- Fixing at specified centres with packing
- Assessment of frame condition and compatibility
- Hardwood or certified frames to suit the door
What the rules say for Hatfield
Fire doors in Hatfield fall under English rules. New and replacement doors are covered by the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks, the Regulatory Reform (Fire Safety) Order 2005, as clarified by the Fire Safety Act 2021, puts the duty on the responsible person to keep fire doors suitable and maintained.
For residential buildings in Hatfield above 11 metres, regulation 10 of the Fire Safety (England) Regulations 2022 adds checks: communal fire doors at least every three months and best-endeavours checks of flat entrance doors at least every twelve months. Higher-risk buildings of at least 18 metres or seven storeys also come under the Building Safety Act 2022, where works may need approval from the Building Safety Regulator.
Buildings and duty holders in Hatfield
From offices to older blocks of flats, the requirement for fire door frames in Hatfield comes from the fire strategy or risk assessment for the building. We work from that document, or help you interpret your inspection report, before quoting.
The steps on a Hatfield installation
- Remove architraves and inspect frame fixing
- Decide repair, re-fix or replace
- Prepare the opening and fit the frame
- Pack and fix at specified centres
- Seal the frame-to-wall gap
- Photograph, fit architraves and make good
Budgeting for fire door frames in Hatfield
As a guide, budget £250–£600 per frame replaced, fixed and sealed, ex VAT for fire door frames. The figure for your Hatfield building depends on the number of doors, the rating, the condition of the frames, finishes, hardware and access. We confirm a fixed price after the free survey.
Hatfield and neighbouring towns
Nearby towns we cover include Welwyn Garden City, St Albans and Potters Bar. Distance from Hatfield does not change our guide prices, and the survey and quote are free.
Questions
Is Hatfield within your coverage area?
It is. We cover Hatfield in Hertfordshire and neighbouring towns such as Welwyn Garden City. There is no charge for the survey.
How quickly can you survey in Hatfield?
It depends on the number of doors and access, but we offer survey dates as soon as we reply to your enquiry. If an inspection has found urgent safety issues, tell us and we'll prioritise.
Can I use expanding foam around a fire door frame?
Only a fire-rated foam with evidence for that use and gap size. Ordinary expanding foam is not suitable.
Why do you photograph the frame before fitting architraves?
Because the fixing and sealing are hidden once the architraves go on. Photographs give you evidence that the hidden work was done correctly.