Fire door frames for Canning Town buildings
Our fire door frames service in Canning Town is simple: a survey, a fixed quote, certified products and an installation finished to the manufacturer's evidence.
Canning Town has a broad mix of buildings, including schools, mixed-use office buildings and shared houses, and the same fire door principles apply to all of them.
In older buildings the frame can be the weak point even where the leaf is sound, so we check it on every Canning Town survey. We photograph every frame we fix in Canning Town before the architraves go on, so the hidden work is on record.
BS 8214:2026 and the frame-to-wall gap
The 2026 revision of BS 8214 strengthened its guidance on sealing the gap between the frame and the surrounding structure, listing material types such as stone wool, mastic and fire-rated foam, and putting the emphasis on using what the evidence supports. We fill and seal that gap with materials covered by the doorset's or sealant's test evidence and photograph it before the architraves go back on.
As standard, the work covers:
- Frame-to-wall gap sealing with evidenced materials
- Photographs of fixing and sealing before covering
- Assessment of frame condition and compatibility
- Fixing at specified centres with packing
Fire door law for Canning Town properties
England's framework applies in Canning Town. Approved Document B guides the fire performance of new and replacement doors under the Building Regulations 2010. Day-to-day duties sit with the responsible person under the Fire Safety Order 2005, and for multi-occupied residential buildings, the Fire Safety (England) Regulations 2022 add duties such as giving residents information about fire doors. In London, the London Fire Brigade is the enforcing authority for fire safety law.
For blocks over 11 metres in Canning Town, those regulations require communal fire door checks at least every three months and best-endeavours flat entrance door checks each year. In higher-risk buildings, building work is overseen by the Building Safety Regulator, so we check whether approval is needed before starting.
Buildings and duty holders in Canning Town
Landlords, managing agents, facilities teams and homeowners in Canning Town can all commission fire door frames from us. The usual settings are schools and older blocks of flats, though single doors for offices are just as welcome.
Our process in Canning Town
- Remove architraves and inspect frame fixing
- Decide repair, re-fix or replace
- Prepare the opening and fit the frame
- Pack and fix at specified centres
- Seal the frame-to-wall gap
- Photograph, fit architraves and make good
What does fire door frames cost in Canning Town?
Guide pricing for fire door frames: £250–£600 per frame replaced, fixed and sealed, ex VAT. Volume work across several doors in one Canning Town building usually brings the per-door cost down. Your written quote is fixed once we have surveyed.
Nearby areas we cover from Canning Town
Nearby towns we cover include Stratford, Bow and Canary Wharf. Distance from Canning Town does not change our guide prices, and the survey and quote are free.
Questions
Do you work in Canning Town?
Yes, we take on fire door frames in Canning Town and the surrounding area, including Stratford and Bow. Send your postcode and a few details and we'll come back with survey dates.
Can you work from an existing inspection report for my Canning Town building?
Yes. Send it over and we can often price straight from it, then confirm on site. We report back against the same door references so you can close actions off.
Why do you photograph the frame before fitting architraves?
Because the fixing and sealing are hidden once the architraves go on. Photographs give you evidence that the hidden work was done correctly.
Can a new frame be fitted to my existing door?
Sometimes, if the frame is compatible with the door's certification. Often it is simpler and better evidenced to replace the whole doorset.