Fire door frames in Mangotsfield: what's involved
When you book fire door frames in Mangotsfield, the aim is simple: doors that close, latch and seal as tested, with records that prove it.
Fire doors in Mangotsfield protect escape routes in light industrial buildings, schools and small offices alike. We adapt the programme to the building and its occupants, never the standard of the installation.
In older buildings the frame can be the weak point even where the leaf is sound, so we check it on every Mangotsfield survey. We photograph every frame we fix in Mangotsfield before the architraves go on, so the hidden work is on record.
Why frames fail inspections
Many fire door problems start with the frame: softwood linings too thin for the door, frames cut back to fit a previous door, frames loose in the wall, or gaps behind the architrave stuffed with ordinary foam or left open. A perfect leaf hung in a frame like that cannot be relied on.
On a typical job that means:
- Assessment of frame condition and compatibility
- Frame-to-wall gap sealing with evidenced materials
- Photographs of fixing and sealing before covering
- Fixing at specified centres with packing
Which fire door rules apply in Mangotsfield?
Fire doors in Mangotsfield fall under English rules. New and replacement doors are covered by the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks, the Regulatory Reform (Fire Safety) Order 2005, as clarified by the Fire Safety Act 2021, puts the duty on the responsible person to keep fire doors suitable and maintained.
For residential buildings in Mangotsfield above 11 metres, regulation 10 of the Fire Safety (England) Regulations 2022 adds checks: communal fire doors at least every three months and best-endeavours checks of flat entrance doors at least every twelve months. Higher-risk buildings of at least 18 metres or seven storeys also come under the Building Safety Act 2022, where works may need approval from the Building Safety Regulator.
Which buildings in Mangotsfield need fire door frames?
Typical settings for fire door frames include schools, offices and converted houses. In Mangotsfield, as anywhere, the duty holder varies: a responsible person for a workplace, a landlord or managing agent for a block or HMO, or a homeowner after building work. We adjust access, timing and paperwork to suit whoever commissions the work.
From enquiry to handover in Mangotsfield
- Remove architraves and inspect frame fixing
- Decide repair, re-fix or replace
- Prepare the opening and fit the frame
- Pack and fix at specified centres
- Seal the frame-to-wall gap
- Photograph, fit architraves and make good
Prices for fire door frames in Mangotsfield
Guide pricing for fire door frames: £250–£600 per frame replaced, fixed and sealed, ex VAT. Volume work across several doors in one Mangotsfield building usually brings the per-door cost down. Your written quote is fixed once we have surveyed.
Around Mangotsfield
Mangotsfield is about 45.7 km from Gloucester, and we cover both, along with nearby Kingswood and Bristol. Send us your postcode and we'll confirm survey dates.
Common questions
Do you work in Mangotsfield?
Yes, we take on fire door frames in Mangotsfield and the surrounding area, including Kingswood and Bristol. Send your postcode and a few details and we'll come back with survey dates.
What happens on a survey in Mangotsfield?
We look at every door in scope: the leaf, frame, gaps, seals, hinges, closer, glazing and how the frame is fixed. You then get a written quote that prices each door separately.
Can a new frame be fitted to my existing door?
Sometimes, if the frame is compatible with the door's certification. Often it is simpler and better evidenced to replace the whole doorset.
What is the frame-to-wall gap?
It is the space between the door frame and the surrounding wall, normally hidden by the architrave. If it is not filled with a suitable fire-resisting material, fire and smoke can pass around the door.