Fire door frames in Arbroath: what's involved
When you book fire door frames in Arbroath, the aim is simple: doors that close, latch and seal as tested, with records that prove it.
Around Arbroath, light industrial buildings, small blocks of flats and care homes all depend on fire doors that close, latch and seal. We survey each opening and tell you plainly which doors need work and which don't.
We photograph every frame we fix in Arbroath before the architraves go on, so the hidden work is on record. Frame-to-wall gaps on Arbroath jobs are sealed with materials supported by the test evidence, as BS 8214:2026 sets out.
BS 8214:2026 and the frame-to-wall gap
The 2026 revision of BS 8214 strengthened its guidance on sealing the gap between the frame and the surrounding structure, listing material types such as stone wool, mastic and fire-rated foam, and putting the emphasis on using what the evidence supports. We fill and seal that gap with materials covered by the doorset's or sealant's test evidence and photograph it before the architraves go back on.
Each installation includes:
- Hardwood or certified frames to suit the door
- Architraves and making good
- Frame-to-wall gap sealing with evidenced materials
- Assessment of frame condition and compatibility
What the rules say for Arbroath
In Arbroath, fire doors are specified against Scotland's Technical Handbooks (Section 2: Fire) under the Building (Scotland) Regulations 2004, rather than Approved Document B. Duties in non-domestic premises come from the Fire (Scotland) Act 2005 and the Fire Safety (Scotland) Regulations 2006.
England's regulation 10 does not apply in Scotland. We follow the building's fire risk assessment and, where building work needs a warrant, the local authority's requirements.
Where fire door frames fit in Arbroath
Typical settings for fire door frames include offices, older blocks of flats and converted houses. In Arbroath, as anywhere, the duty holder varies: a responsible person for a workplace, a landlord or managing agent for a block or HMO, or a homeowner after building work. We adjust access, timing and paperwork to suit whoever commissions the work.
How a Arbroath job runs
- Remove architraves and inspect frame fixing
- Decide repair, re-fix or replace
- Prepare the opening and fit the frame
- Pack and fix at specified centres
- Seal the frame-to-wall gap
- Photograph, fit architraves and make good
Budgeting for fire door frames in Arbroath
Budget around £250–£600 per frame replaced, fixed and sealed, ex VAT for fire door frames. Our guide prices are the same in Arbroath as elsewhere; what changes the cost is the doors themselves. Use our guide-price tool for a quick estimate.
Covering Arbroath and nearby
We also cover towns near Arbroath, including Dundee (26.0 km away), Glenrothes and Perth. If your building is in DD11 or a neighbouring district, the service and pricing are the same.
Questions from Arbroath
Do you work in Arbroath?
Yes, we take on fire door frames in Arbroath and the surrounding area, including Dundee and Glenrothes. Send your postcode and a few details and we'll come back with survey dates.
What happens on a survey in Arbroath?
We look at every door in scope: the leaf, frame, gaps, seals, hinges, closer, glazing and how the frame is fixed. You then get a written quote that prices each door separately.
Why do you photograph the frame before fitting architraves?
Because the fixing and sealing are hidden once the architraves go on. Photographs give you evidence that the hidden work was done correctly.
Can a new frame be fitted to my existing door?
Sometimes, if the frame is compatible with the door's certification. Often it is simpler and better evidenced to replace the whole doorset.