Fire door frames: our service in Bearsden
When you book fire door frames in Bearsden, the aim is simple: doors that close, latch and seal as tested, with records that prove it.
Bearsden has a broad mix of buildings, including small offices, light industrial buildings and family homes after loft conversions, and the same fire door principles apply to all of them.
In older buildings the frame can be the weak point even where the leaf is sound, so we check it on every Bearsden survey. Frame-to-wall gaps on Bearsden jobs are sealed with materials supported by the test evidence, as BS 8214:2026 sets out.
Frames on their own
Where a leaf is sound but the frame is not, a new compatible frame can sometimes be fitted to the existing leaf, provided the combination is supported by the leaf's certification. More often, a frame replacement is part of a doorset installation.
What you get:
- Fixing at specified centres with packing
- Photographs of fixing and sealing before covering
- Frame-to-wall gap sealing with evidenced materials
- Architraves and making good
Which fire door rules apply in Bearsden?
Scottish rules apply to fire doors in Bearsden. The Technical Handbooks under the Building (Scotland) Regulations 2004 set the standard for new and altered doors, and the local authority issues building warrants where they are needed. Workplaces and other non-domestic premises are covered by the Fire (Scotland) Act 2005.
Residential common parts in Bearsden are treated differently from England, so we check the fire risk assessment and any landlord or factor requirements before specifying work.
Where fire door frames fit in Bearsden
Typical settings for fire door frames include schools, older blocks of flats and converted houses. In Bearsden, as anywhere, the duty holder varies: a responsible person for a workplace, a landlord or managing agent for a block or HMO, or a homeowner after building work. We adjust access, timing and paperwork to suit whoever commissions the work.
Our process in Bearsden
- Remove architraves and inspect frame fixing
- Decide repair, re-fix or replace
- Prepare the opening and fit the frame
- Pack and fix at specified centres
- Seal the frame-to-wall gap
- Photograph, fit architraves and make good
What does fire door frames cost in Bearsden?
If you need a budget figure first, the guide for fire door frames is £250–£600 per frame replaced, fixed and sealed, ex VAT. We firm that up after a survey, pricing each door separately so you can see where the money goes.
Covering Bearsden and nearby
Beyond Bearsden itself we also cover nearby towns such as Clydebank (4.8 km), Renfrew and Bishopbriggs. The service, pricing and evidence are the same wherever you are.
Questions
Is Bearsden within your coverage area?
It is. We cover Bearsden in Dunbartonshire and neighbouring towns such as Clydebank. There is no charge for the survey.
What happens on a survey in Bearsden?
We look at every door in scope: the leaf, frame, gaps, seals, hinges, closer, glazing and how the frame is fixed. You then get a written quote that prices each door separately.
What is the frame-to-wall gap?
It is the space between the door frame and the surrounding wall, normally hidden by the architrave. If it is not filled with a suitable fire-resisting material, fire and smoke can pass around the door.
Can I use expanding foam around a fire door frame?
Only a fire-rated foam with evidence for that use and gap size. Ordinary expanding foam is not suitable.