Getting fire door frames right in Bideford
From the EX39 postcode district outwards, we take on fire door frames across Bideford for homes, blocks and workplaces.
Buildings in and around Bideford range from small offices to schools and care homes. Whatever the building, the standard is the same: certified products, correct gaps, seals and closers, and a frame sealed to the wall.
We photograph every frame we fix in Bideford before the architraves go on, so the hidden work is on record. Frame-to-wall gaps on Bideford jobs are sealed with materials supported by the test evidence, as BS 8214:2026 sets out.
Why frames fail inspections
Many fire door problems start with the frame: softwood linings too thin for the door, frames cut back to fit a previous door, frames loose in the wall, or gaps behind the architrave stuffed with ordinary foam or left open. A perfect leaf hung in a frame like that cannot be relied on.
What you get:
- Frame-to-wall gap sealing with evidenced materials
- Photographs of fixing and sealing before covering
- Hardwood or certified frames to suit the door
- Architraves and making good
Rules and responsibilities in Bideford
The rules that apply to fire doors in Bideford are England's. The responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire doors in non-domestic premises and the common parts of flats in working order; the Fire Safety Act 2021 confirmed that this includes flat entrance doors onto common parts.
Where a Bideford block is above 11 metres, regulation 10 of the 2022 regulations means communal doors are checked every three months and flat entrance doors annually on a best-endeavours basis. Replacement doors must also satisfy the Building Regulations, with Approved Document B as the guidance most building control bodies work from.
Buildings and duty holders in Bideford
Typical settings for fire door frames include converted houses, schools and older blocks of flats. In Bideford, as anywhere, the duty holder varies: a responsible person for a workplace, a landlord or managing agent for a block or HMO, or a homeowner after building work. We adjust access, timing and paperwork to suit whoever commissions the work.
From enquiry to handover in Bideford
- Remove architraves and inspect frame fixing
- Decide repair, re-fix or replace
- Prepare the opening and fit the frame
- Pack and fix at specified centres
- Seal the frame-to-wall gap
- Photograph, fit architraves and make good
What does fire door frames cost in Bideford?
Guide pricing for fire door frames: £250–£600 per frame replaced, fixed and sealed, ex VAT. Volume work across several doors in one Bideford building usually brings the per-door cost down. Your written quote is fixed once we have surveyed.
Covering Bideford and nearby
We also cover towns near Bideford, including Barnstaple (12.7 km away), Tiverton and Exeter. If your building is in EX39 or a neighbouring district, the service and pricing are the same.
Questions from Bideford
Do you cover EX39 and nearby postcodes?
Yes. We cover Bideford including EX39, and nearby towns such as Barnstaple and Tiverton. The survey and written quote are free.
Do I need to be there for the survey?
Someone needs to give us access to the doors. For blocks and commercial buildings, a caretaker or site contact is fine; for HMOs and homes, we agree a time with you or your tenants.
What is the frame-to-wall gap?
It is the space between the door frame and the surrounding wall, normally hidden by the architrave. If it is not filled with a suitable fire-resisting material, fire and smoke can pass around the door.
Why do you photograph the frame before fitting architraves?
Because the fixing and sealing are hidden once the architraves go on. Photographs give you evidence that the hidden work was done correctly.