Fire door frames for Heanor buildings
Our fire door frames service covers Heanor and the wider Derbyshire area. Every job starts with a survey of the openings, so the quote reflects your actual doors rather than a guess.
Heanor has a broad mix of buildings, including small offices, houses with integral garages and light industrial buildings, and the same fire door principles apply to all of them.
Frame-to-wall gaps on Heanor jobs are sealed with materials supported by the test evidence, as BS 8214:2026 sets out. In older buildings the frame can be the weak point even where the leaf is sound, so we check it on every Heanor survey.
Why frames fail inspections
Many fire door problems start with the frame: softwood linings too thin for the door, frames cut back to fit a previous door, frames loose in the wall, or gaps behind the architrave stuffed with ordinary foam or left open. A perfect leaf hung in a frame like that cannot be relied on.
As standard, the work covers:
- Assessment of frame condition and compatibility
- Architraves and making good
- Hardwood or certified frames to suit the door
- Photographs of fixing and sealing before covering
Which fire door rules apply in Heanor?
The rules that apply to fire doors in Heanor are England's. The responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire doors in non-domestic premises and the common parts of flats in working order; the Fire Safety Act 2021 confirmed that this includes flat entrance doors onto common parts.
Where a Heanor block is above 11 metres, regulation 10 of the 2022 regulations means communal doors are checked every three months and flat entrance doors annually on a best-endeavours basis. Replacement doors must also satisfy the Building Regulations, with Approved Document B as the guidance most building control bodies work from.
Who needs fire door frames in Heanor?
Typical settings for fire door frames include schools, older blocks of flats and offices. In Heanor, as anywhere, the duty holder varies: a responsible person for a workplace, a landlord or managing agent for a block or HMO, or a homeowner after building work. We adjust access, timing and paperwork to suit whoever commissions the work.
What happens after you enquire
- Remove architraves and inspect frame fixing
- Decide repair, re-fix or replace
- Prepare the opening and fit the frame
- Pack and fix at specified centres
- Seal the frame-to-wall gap
- Photograph, fit architraves and make good
Prices for fire door frames in Heanor
Guide pricing for fire door frames: £250–£600 per frame replaced, fixed and sealed, ex VAT. Volume work across several doors in one Heanor building usually brings the per-door cost down. Your written quote is fixed once we have surveyed.
Heanor and neighbouring towns
Heanor is about 13.0 km from Derby, and we cover both, along with nearby Ripley and Ilkeston. Send us your postcode and we'll confirm survey dates.
Questions
Is Heanor within your coverage area?
It is. We cover Heanor in Derbyshire and neighbouring towns such as Ripley. There is no charge for the survey.
Can you work from an existing inspection report for my Heanor building?
Yes. Send it over and we can often price straight from it, then confirm on site. We report back against the same door references so you can close actions off.
Why do you photograph the frame before fitting architraves?
Because the fixing and sealing are hidden once the architraves go on. Photographs give you evidence that the hidden work was done correctly.
Can I use expanding foam around a fire door frame?
Only a fire-rated foam with evidence for that use and gap size. Ordinary expanding foam is not suitable.