Fire door frames in St Austell, done to the evidence
Our fire door frames service in St Austell is simple: a survey, a fixed quote, certified products and an installation finished to the manufacturer's evidence.
Around St Austell, light industrial buildings, small offices and small blocks of flats all depend on fire doors that close, latch and seal. We survey each opening and tell you plainly which doors need work and which don't.
In older buildings the frame can be the weak point even where the leaf is sound, so we check it on every St Austell survey. Frame-to-wall gaps on St Austell jobs are sealed with materials supported by the test evidence, as BS 8214:2026 sets out.
Frames on their own
Where a leaf is sound but the frame is not, a new compatible frame can sometimes be fitted to the existing leaf, provided the combination is supported by the leaf's certification. More often, a frame replacement is part of a doorset installation.
On a typical job that means:
- Hardwood or certified frames to suit the door
- Architraves and making good
- Frame-to-wall gap sealing with evidenced materials
- Assessment of frame condition and compatibility
Which fire door rules apply in St Austell?
Fire doors in St Austell fall under English rules. New and replacement doors are covered by the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks, the Regulatory Reform (Fire Safety) Order 2005, as clarified by the Fire Safety Act 2021, puts the duty on the responsible person to keep fire doors suitable and maintained.
For residential buildings in St Austell above 11 metres, regulation 10 of the Fire Safety (England) Regulations 2022 adds checks: communal fire doors at least every three months and best-endeavours checks of flat entrance doors at least every twelve months. Higher-risk buildings of at least 18 metres or seven storeys also come under the Building Safety Act 2022, where works may need approval from the Building Safety Regulator.
Where fire door frames fit in St Austell
The need for fire door frames usually arises in schools or older blocks of flats, and sometimes converted houses. Each has its own pressures, such as residents at home or a building that must stay open, so we plan the sequence of work in St Austell to keep escape routes protected throughout.
The steps on a St Austell installation
- Remove architraves and inspect frame fixing
- Decide repair, re-fix or replace
- Prepare the opening and fit the frame
- Pack and fix at specified centres
- Seal the frame-to-wall gap
- Photograph, fit architraves and make good
Prices for fire door frames in St Austell
If you need a budget figure first, the guide for fire door frames is £250–£600 per frame replaced, fixed and sealed, ex VAT. We firm that up after a survey, pricing each door separately so you can see where the money goes.
Covering St Austell and nearby
Nearby towns we cover include Truro, Newquay and Falmouth. Distance from St Austell does not change our guide prices, and the survey and quote are free.
Common questions
Do you cover PL25 and nearby postcodes?
Yes. We cover St Austell including PL25, and nearby towns such as Truro and Newquay. The survey and written quote are free.
Can you work from an existing inspection report for my St Austell building?
Yes. Send it over and we can often price straight from it, then confirm on site. We report back against the same door references so you can close actions off.
Why do you photograph the frame before fitting architraves?
Because the fixing and sealing are hidden once the architraves go on. Photographs give you evidence that the hidden work was done correctly.
Can a new frame be fitted to my existing door?
Sometimes, if the frame is compatible with the door's certification. Often it is simpler and better evidenced to replace the whole doorset.