Fire door closers in Gosport: what's involved
Looking for fire door closers in Gosport? We supply and fit certified fire doors and components across Gosport and the wider Hampshire area, working from a free survey and a fixed written quote.
Buildings in and around Gosport range from care homes to houses with integral garages and schools. Whatever the building, the standard is the same: certified products, correct gaps, seals and closers, and a frame sealed to the wall.
A closer that fails to latch the door is one of the first things we put right on Gosport fire doors. Free-swing closers are a practical option for Gosport care homes and supported living.
Overhead, concealed or free-swing
Overhead closers are the most common and easiest to maintain. Concealed closers keep a clean look and deter tampering, if covered by the door's evidence. Free-swing closers let a door move freely in everyday use and close when the fire alarm sounds, which is useful in care homes and for people who find doors hard to open.
What you get:
- Close-and-latch test from full open
- Assessment of door size, weight and use
- Record of model and settings
- Correctly powered closer to BS EN 1154
Which fire door rules apply in Gosport?
The rules that apply to fire doors in Gosport are England's. The responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire doors in non-domestic premises and the common parts of flats in working order; the Fire Safety Act 2021 confirmed that this includes flat entrance doors onto common parts.
Where a Gosport block is above 11 metres, regulation 10 of the 2022 regulations means communal doors are checked every three months and flat entrance doors annually on a best-endeavours basis. Replacement doors must also satisfy the Building Regulations, with Approved Document B as the guidance most building control bodies work from.
Where fire door closers fit in Gosport
Typical settings for fire door closers include offices, HMOs and schools. In Gosport, as anywhere, the duty holder varies: a responsible person for a workplace, a landlord or managing agent for a block or HMO, or a homeowner after building work. We adjust access, timing and paperwork to suit whoever commissions the work.
The steps on a Gosport installation
- Check the door, frame and existing closer
- Select a closer suited to the leaf and use
- Fit to the template and the door's evidence
- Adjust closing and latching speeds
- Test from wide and small opening angles
- Record the closer and its settings
Guide prices in Gosport
If you need a budget figure first, the guide for fire door closers is £90–£220 per closer supplied and fitted; adjustment visits from £195, ex VAT. We firm that up after a survey, pricing each door separately so you can see where the money goes.
Nearby areas we cover from Gosport
Neighbouring towns such as Portsmouth, Fareham, Ryde and Waterlooville are covered too, so clients with several buildings can use one installer and one evidence format.
Questions
Is Gosport within your coverage area?
It is. We cover Gosport in Hampshire and neighbouring towns such as Portsmouth. There is no charge for the survey.
Can you work from an existing inspection report for my Gosport building?
Yes. Send it over and we can often price straight from it, then confirm on site. We report back against the same door references so you can close actions off.
Can a fire door closer be too strong?
Yes. An over-powered or badly set closer makes the door hard to open and may lead people to wedge it. The goal is reliable closing with a reasonable opening force.
Why won't my fire door latch?
Usually the closer is out of adjustment or under-powered, or the latch and keep are misaligned. Both are normally quick to fix.

