FD60 fire doors in Weymouth, done to the evidence
We provide FD60 fire doors in Weymouth (DT4 and the surrounding postcodes), from the first survey through to a documented handover.
In and around Weymouth, fire door work covers everything from HMOs to houses with integral garages. We plan each job around the people who use the building.
Before ordering FD60 doors for a Weymouth building, we check the rating each opening actually needs, because over-specifying makes doors heavier and dearer. For FD60 work in Weymouth we generally fit certified doorsets, so frame and leaf share the same test evidence.
What do you hand over at the end?
For every FD60 opening we record the product and certificate reference, the gap measurements, the hinge and closer specification, how the frame was fixed and what was used to seal the frame-to-structure gap, with photographs before the architraves go on. That record is what your fire risk assessor or building control officer will ask for.
What you get:
- Check of the fire strategy rating for each opening
- Intumescent and smoke seals as specified
- 60-minute glazing systems where vision panels are needed
- Frame fixing and structural gap sealing recorded with photos
What the rules say for Weymouth
England's framework applies in Weymouth. Approved Document B guides the fire performance of new and replacement doors under the Building Regulations 2010. Day-to-day duties sit with the responsible person under the Fire Safety Order 2005, and for multi-occupied residential buildings, the Fire Safety (England) Regulations 2022 add duties such as giving residents information about fire doors.
For blocks over 11 metres in Weymouth, those regulations require communal fire door checks at least every three months and best-endeavours flat entrance door checks each year. In higher-risk buildings, building work is overseen by the Building Safety Regulator, so we check whether approval is needed before starting.
Which buildings in Weymouth need FD60 fire doors?
The need for FD60 fire doors usually arises in mixed-use commercial buildings or plant and boiler rooms, and sometimes refuse stores. Each has its own pressures, such as residents at home or a building that must stay open, so we plan the sequence of work in Weymouth to keep escape routes protected throughout.
The steps on a Weymouth installation
- Confirm the 60-minute requirement against the fire strategy
- Survey structure, opening size and wall type
- Order the certified doorset with ironmongery to its evidence
- Install the frame, fix and seal it to the structure
- Hang, adjust and test the leaf, closer and latching
- Record evidence and make good
Budgeting for FD60 fire doors in Weymouth
Guide pricing for FD60 fire doors: £850–£1,800 per FD60 doorset supplied and fitted, ex VAT. Volume work across several doors in one Weymouth building usually brings the per-door cost down. Your written quote is fixed once we have surveyed.
Covering Weymouth and nearby
Weymouth is about 42.6 km from Bournemouth, and we cover both, along with nearby Poole and Yeovil. Send us your postcode and we'll confirm survey dates.
Common questions
Do you work in Weymouth?
Yes, we take on FD60 fire doors in Weymouth and the surrounding area, including Poole and Yeovil. Send your postcode and a few details and we'll come back with survey dates.
Can you work from an existing inspection report for my Weymouth building?
Yes. Send it over and we can often price straight from it, then confirm on site. We report back against the same door references so you can close actions off.
Is FD60 just a thicker FD30?
No. FD60 doors are built and tested as a different product, usually with a thicker core, different seals and different ironmongery. Only the tested combination carries the 60-minute rating.
Do FD60 doors need smoke seals?
If the fire strategy asks for smoke control, yes: the door will be specified as FD60S or E60Sa with smoke seals. Many plant room doors are FD60 without a smoke requirement.