Getting FD30 fire doors right in Dunfermline
Our FD30 fire doors service in Dunfermline is simple: a survey, a fixed quote, certified products and an installation finished to the manufacturer's evidence.
In and around Dunfermline, fire door work covers everything from industrial estates to houses with integral garages. We plan each job around the people who use the building.
For a mixed portfolio in Dunfermline, we can survey every FD30 opening in one visit and price leaf-only and doorset options side by side. Each FD30 leaf we supply for Dunfermline is sized for the opening, rather than trimmed beyond what its certification allows.
Leaf only or a full doorset?
If the existing frame is sound, correctly sized, securely fixed and compatible with the new leaf's certification, a new FD30 leaf can be hung in it. Many frames do not pass that test: old softwood linings, frames that have been cut about for previous doors, or frames with no evidence of how they were fixed. In those cases a certified doorset (leaf, frame and ironmongery tested together) is the cleaner answer and usually the quicker one on site.
We tell you which route each opening needs on the survey, door by door, and why.
What you get:
- Frame-to-wall gap sealed with an evidenced material
- Survey of the opening, frame and existing ironmongery
- Overhead closer set to close and latch
- Fire-tested hinges, latch or lock and intumescent pads
The regulations behind fire doors in Dunfermline
Dunfermline is in Scotland, which has its own system. Building work, including many fire door replacements, is governed by the Building (Scotland) Regulations 2004 and the Technical Handbooks, with Section 2 covering fire; where a building warrant is needed it comes from the local authority. In non-domestic premises, the Fire (Scotland) Act 2005 and the Fire Safety (Scotland) Regulations 2006 set the duties.
The common parts of private blocks of flats largely sit outside Part 3 of the 2005 Act, so the fire risk assessment and housing obligations usually drive fire door work in residential buildings in Dunfermline.
Who needs FD30 fire doors in Dunfermline?
The need for FD30 fire doors usually arises in shops or HMOs, and sometimes blocks of flats. Each has its own pressures, such as residents at home or a building that must stay open, so we plan the sequence of work in Dunfermline to keep escape routes protected throughout.
How a Dunfermline job runs
- Measure the opening, check the frame and confirm the rating needed
- Order a certified leaf or doorset to size, with matching components
- Remove the old door and assess the frame or structural opening
- Fix the frame and hang the leaf to the certified gap tolerances
- Fit seals, hinges, latch, closer and signage, then test close-and-latch
- Seal the frame-to-wall gap, make good and record the evidence
What does FD30 fire doors cost in Dunfermline?
Budget around £300–£600 for a leaf into a sound existing frame; £650–£1,300 for a doorset, ex VAT for FD30 fire doors. Our guide prices are the same in Dunfermline as elsewhere; what changes the cost is the doors themselves. Use our guide-price tool for a quick estimate.
Around Dunfermline
As well as Dunfermline, we cover neighbouring towns including Livingston, Kirkcaldy and Edinburgh. The survey and quote are free.
Questions from Dunfermline
Do you work in Dunfermline?
Yes, we take on FD30 fire doors in Dunfermline and the surrounding area, including Livingston and Kirkcaldy. Send your postcode and a few details and we'll come back with survey dates.
How quickly can you survey in Dunfermline?
It depends on the number of doors and access, but we offer survey dates as soon as we reply to your enquiry. If an inspection has found urgent safety issues, tell us and we'll prioritise.
Do FD30 doors need a closer?
Most do. Doors on escape routes, flat entrance doors and doors in the common parts of buildings need a self-closing device that shuts and latches the door. Some doors inside houses and locked riser doors are exceptions, depending on the fire strategy.
What is the difference between FD30 and FD30S?
FD30S has been tested for smoke control as well as fire. It adds a smoke seal, usually a brush or blade, and needs a tight threshold gap. Flat entrance doors and doors onto protected escape routes are commonly specified as FD30S.