Fire door supply and fitting in England, Wales, Scotland and Northern Ireland sales@firedoor-installation.comGuide prices
Fire Door Installation

FD30 fire door installation in Llanelli

The everyday 30-minute fire door, supplied as a leaf or full doorset and fitted to its evidence. Free survey in Llanelli and door-by-door pricing.

Quote in Llanelli

Free survey and a fixed written quote.

Prefer to talk? Call 0800 088 6248.

Getting FD30 fire doors right in Llanelli

Our FD30 fire doors service in Llanelli is simple: a survey, a fixed quote, certified products and an installation finished to the manufacturer's evidence.

Buildings in and around Llanelli range from small blocks of flats to small offices and houses with integral garages. Whatever the building, the standard is the same: certified products, correct gaps, seals and closers, and a frame sealed to the wall.

In Llanelli, FD30 doors are the usual choice for escape-route corridors, stairs and kitchen doors where the fire strategy asks for 30 minutes. For a mixed portfolio in Llanelli, we can survey every FD30 opening in one visit and price leaf-only and doorset options side by side.

Leaf only or a full doorset?

If the existing frame is sound, correctly sized, securely fixed and compatible with the new leaf's certification, a new FD30 leaf can be hung in it. Many frames do not pass that test: old softwood linings, frames that have been cut about for previous doors, or frames with no evidence of how they were fixed. In those cases a certified doorset (leaf, frame and ironmongery tested together) is the cleaner answer and usually the quicker one on site.

We tell you which route each opening needs on the survey, door by door, and why.

What you get:

  • Photo record, product data and certificate references at handover
  • Frame-to-wall gap sealed with an evidenced material
  • Overhead closer set to close and latch
  • Fire-tested hinges, latch or lock and intumescent pads

Rules and responsibilities in Llanelli

Because Llanelli is in Wales, we work to the Building Regulations as they apply in Wales and to the Welsh version of Approved Document B. The responsible person duties under the Fire Safety Order 2005 still apply to workplaces and common parts.

England's fire door checking rules for tall residential buildings do not apply in Wales, so the checking frequency for doors in Llanelli comes from your fire risk assessment.

Where FD30 fire doors fit in Llanelli

Typical settings for FD30 fire doors include care homes, HMOs and shops. In Llanelli, as anywhere, the duty holder varies: a responsible person for a workplace, a landlord or managing agent for a block or HMO, or a homeowner after building work. We adjust access, timing and paperwork to suit whoever commissions the work.

How a Llanelli job runs

  1. Measure the opening, check the frame and confirm the rating needed
  2. Order a certified leaf or doorset to size, with matching components
  3. Remove the old door and assess the frame or structural opening
  4. Fix the frame and hang the leaf to the certified gap tolerances
  5. Fit seals, hinges, latch, closer and signage, then test close-and-latch
  6. Seal the frame-to-wall gap, make good and record the evidence

Guide prices in Llanelli

As a guide, budget £300–£600 for a leaf into a sound existing frame; £650–£1,300 for a doorset, ex VAT for FD30 fire doors. The figure for your Llanelli building depends on the number of doors, the rating, the condition of the frames, finishes, hardware and access. We confirm a fixed price after the free survey.

Covering Llanelli and nearby

As well as Llanelli, we cover neighbouring towns including Gorseinon, Swansea and Ammanford. The survey and quote are free.

Common questions

Do you work in Llanelli?

Yes, we take on FD30 fire doors in Llanelli and the surrounding area, including Gorseinon and Swansea. Send your postcode and a few details and we'll come back with survey dates.

Can you work from an existing inspection report for my Llanelli building?

Yes. Send it over and we can often price straight from it, then confirm on site. We report back against the same door references so you can close actions off.

What is the difference between FD30 and FD30S?

FD30S has been tested for smoke control as well as fire. It adds a smoke seal, usually a brush or blade, and needs a tight threshold gap. Flat entrance doors and doors onto protected escape routes are commonly specified as FD30S.

Do FD30 doors need a closer?

Most do. Doors on escape routes, flat entrance doors and doors in the common parts of buildings need a self-closing device that shuts and latches the door. Some doors inside houses and locked riser doors are exceptions, depending on the fire strategy.

More FD30 fire doors in Dyfed

Book a free survey in Llanelli

Tell us about the doors and we will come back with survey dates and a fixed written quote.

CallGet a quote