Double fire doors: our service in Rickmansworth
From the WD3 postcode district outwards, we take on double fire doors across Rickmansworth for homes, blocks and workplaces.
Rickmansworth has a broad mix of buildings, including light industrial buildings, small offices and family homes after loft conversions, and the same fire door principles apply to all of them.
Double doors on wards, school corridors and lobbies in Rickmansworth take heavy use, so closing sequence and meeting-edge seals get extra attention. Every pair we fit in Rickmansworth is commissioned so both leaves close in the right order and latch.
Leaf-and-a-half for wider routes
Leaf-and-a-half doors give a usable everyday opening through the main leaf, with the smaller leaf opened for beds, trolleys or deliveries. They are common in care homes, hospitals and schools. The smaller leaf may be held with flush bolts; any bolts and their positions must be covered by the evidence.
What you get:
- Commissioning of closing sequence
- Closers matched to each leaf
- Flush bolts and hold-opens within evidence
- Door coordinators where meeting edges are rebated
Which fire door rules apply in Rickmansworth?
England's framework applies in Rickmansworth. Approved Document B guides the fire performance of new and replacement doors under the Building Regulations 2010. Day-to-day duties sit with the responsible person under the Fire Safety Order 2005, and for multi-occupied residential buildings, the Fire Safety (England) Regulations 2022 add duties such as giving residents information about fire doors.
For blocks over 11 metres in Rickmansworth, those regulations require communal fire door checks at least every three months and best-endeavours flat entrance door checks each year. In higher-risk buildings, building work is overseen by the Building Safety Regulator, so we check whether approval is needed before starting.
Which buildings in Rickmansworth need double fire doors?
From schools to care homes, the requirement for double fire doors in Rickmansworth comes from the fire strategy or risk assessment for the building. We work from that document, or help you interpret your inspection report, before quoting.
What happens after you enquire
- Survey opening width, use and traffic
- Select pair configuration and hardware set
- Order certified doorset with coordinator and bolts if needed
- Install frame and hang both leaves
- Set closing sequence, seals and latching
- Test hold-open release and record evidence
Guide prices in Rickmansworth
If you need a budget figure first, the guide for double fire doors is £1,600–£3,400 per pair supplied and fitted, depending on glazing and hardware, ex VAT. We firm that up after a survey, pricing each door separately so you can see where the money goes.
Around Rickmansworth
Rickmansworth is about 5.9 km from Watford, and we cover both, along with nearby Chalfont St Peter and North Watford. Send us your postcode and we'll confirm survey dates.
Questions
Do you cover WD3 and nearby postcodes?
Yes. We cover Rickmansworth including WD3, and nearby towns such as Watford and Chalfont St Peter. The survey and written quote are free.
Do I need to be there for the survey?
Someone needs to give us access to the doors. For blocks and commercial buildings, a caretaker or site contact is fine; for HMOs and homes, we agree a time with you or your tenants.
Can double fire doors be held open?
Yes, with hold-open devices that release on the fire alarm, or with free-swing closers. Wedges and hooks are not acceptable.
Why does the gap between the two leaves matter?
The meeting edges are where flame and smoke can pass most easily. The gap and the seals there must match the certification for the pair to perform as tested.