Double fire doors in Bolton: what's involved
If you need double fire doors in Bolton, we can survey, supply and install, then leave you the evidence your fire risk assessor will ask for.
Bolton has a broad mix of buildings, including industrial units, schools and offices, and the same fire door principles apply to all of them.
Double doors on wards, school corridors and lobbies in Bolton take heavy use, so closing sequence and meeting-edge seals get extra attention. Every pair we fit in Bolton is commissioned so both leaves close in the right order and latch.
Why pairs need extra care
The meeting stiles are the weak point of a pair. Gaps there must be controlled, both leaves need intumescent and smoke seals as specified, and if the meeting edges are rebated, a door coordinator is usually needed so the leaves close in the right order. If they close out of sequence, the door may not latch and will not perform as tested.
On a typical job that means:
- Door coordinators where meeting edges are rebated
- Meeting-stile intumescent and smoke seals
- Commissioning of closing sequence
- Flush bolts and hold-opens within evidence
Which fire door rules apply in Bolton?
England's framework applies in Bolton. Approved Document B guides the fire performance of new and replacement doors under the Building Regulations 2010. Day-to-day duties sit with the responsible person under the Fire Safety Order 2005, and for multi-occupied residential buildings, the Fire Safety (England) Regulations 2022 add duties such as giving residents information about fire doors.
For blocks over 11 metres in Bolton, those regulations require communal fire door checks at least every three months and best-endeavours flat entrance door checks each year. In higher-risk buildings, building work is overseen by the Building Safety Regulator, so we check whether approval is needed before starting.
Who needs double fire doors in Bolton?
From care homes to communal corridors, the requirement for double fire doors in Bolton comes from the fire strategy or risk assessment for the building. We work from that document, or help you interpret your inspection report, before quoting.
Our process in Bolton
- Survey opening width, use and traffic
- Select pair configuration and hardware set
- Order certified doorset with coordinator and bolts if needed
- Install frame and hang both leaves
- Set closing sequence, seals and latching
- Test hold-open release and record evidence
What does double fire doors cost in Bolton?
Budget around £1,600–£3,400 per pair supplied and fitted, depending on glazing and hardware, ex VAT for double fire doors. Our guide prices are the same in Bolton as elsewhere; what changes the cost is the doors themselves. Use our guide-price tool for a quick estimate.
Nearby areas we cover from Bolton
Neighbouring towns such as Farnworth, Westhoughton, Radcliffe and Atherton are covered too, so clients with several buildings can use one installer and one evidence format.
Questions from Bolton
Is Bolton within your coverage area?
It is. We cover Bolton in Greater Manchester and neighbouring towns such as Farnworth. There is no charge for the survey.
Can you work from an existing inspection report for my Bolton building?
Yes. Send it over and we can often price straight from it, then confirm on site. We report back against the same door references so you can close actions off.
Can double fire doors be held open?
Yes, with hold-open devices that release on the fire alarm, or with free-swing closers. Wedges and hooks are not acceptable.
Why does the gap between the two leaves matter?
The meeting edges are where flame and smoke can pass most easily. The gap and the seals there must match the certification for the pair to perform as tested.