What double fire doors in Derby should include
When you book double fire doors in Derby, the aim is simple: doors that close, latch and seal as tested, with records that prove it.
Fire doors in Derby protect escape routes in converted flats, restaurants and purpose-built blocks of flats alike. We adapt the programme to the building and its occupants, never the standard of the installation.
Double doors on wards, school corridors and lobbies in Derby take heavy use, so closing sequence and meeting-edge seals get extra attention. Every pair we fit in Derby is commissioned so both leaves close in the right order and latch.
Hold-opens and escape
Pairs on corridors are often held open in daily use, with hold-open devices releasing both leaves when the alarm sounds. Where a pair is on an escape route used by the public, the escape hardware and the direction of opening also need to suit the fire strategy.
On a typical job that means:
- Door coordinators where meeting edges are rebated
- Commissioning of closing sequence
- Meeting-stile intumescent and smoke seals
- Closers matched to each leaf
Which fire door rules apply in Derby?
In Derby, as elsewhere in England, the starting point is the Fire Safety Order 2005: whoever controls a workplace or the shared parts of a residential block must make sure its fire doors work. When doors are replaced, the Building Regulations and Approved Document B set the standard the new work has to meet.
Blocks above 11 metres have a specific routine under regulation 10 of the Fire Safety (England) Regulations 2022: quarterly checks of communal fire doors and annual best-endeavours checks of flat front doors. If your Derby building is a higher-risk building under the Building Safety Act 2022, we confirm the approval route with the Principal Accountable Person before any work is ordered.
Where double fire doors fit in Derby
Typical settings for double fire doors include hospitals and clinics, communal corridors and schools. In Derby, as anywhere, the duty holder varies: a responsible person for a workplace, a landlord or managing agent for a block or HMO, or a homeowner after building work. We adjust access, timing and paperwork to suit whoever commissions the work.
From enquiry to handover in Derby
- Survey opening width, use and traffic
- Select pair configuration and hardware set
- Order certified doorset with coordinator and bolts if needed
- Install frame and hang both leaves
- Set closing sequence, seals and latching
- Test hold-open release and record evidence
Prices for double fire doors in Derby
If you need a budget figure first, the guide for double fire doors is £1,600–£3,400 per pair supplied and fitted, depending on glazing and hardware, ex VAT. We firm that up after a survey, pricing each door separately so you can see where the money goes.
Covering Derby and nearby
As well as Derby, we cover neighbouring towns including Belper, Ilkeston and Heanor. The survey and quote are free.
Questions from Derby
Is Derby within your coverage area?
It is. We cover Derby in Derbyshire and neighbouring towns such as Belper. There is no charge for the survey.
What happens on a survey in Derby?
We look at every door in scope: the leaf, frame, gaps, seals, hinges, closer, glazing and how the frame is fixed. You then get a written quote that prices each door separately.
Do both leaves need closers?
Usually, yes. Each leaf of a fire door pair needs to close itself. The closers are sized to each leaf's width and weight.
Can double fire doors be held open?
Yes, with hold-open devices that release on the fire alarm, or with free-swing closers. Wedges and hooks are not acceptable.