What composite fire doors in Brixton should include
Our composite fire doors service in Brixton is simple: a survey, a fixed quote, certified products and an installation finished to the manufacturer's evidence.
Buildings in and around Brixton range from care homes to clinics and schools. Whatever the building, the standard is the same: certified products, correct gaps, seals and closers, and a frame sealed to the wall.
We only fit composite doors in Brixton in configurations covered by the product's certification. Composite doorsets are a popular option for flat entrance programmes, and in Brixton they suit blocks where residents want colour choice and low maintenance.
How we fit composite doorsets
Composite doorsets are installed strictly to the manufacturer's instructions, which typically set out fixing positions, packing, the sealing of the frame-to-wall gap and threshold details. We set the closer so that it closes and latches the door, test the locks and record everything for your files. Where a resident or freeholder chooses colours, we make sure the chosen option is within the certified range.
On a typical job that means:
- Advice on certified composite products and options
- Weather detailing for external deck-access doors
- Certificate reference and photo record
- Viewer, numerals and security hardware within evidence
Fire door law for Brixton properties
Fire doors in Brixton fall under English rules. New and replacement doors are covered by the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks, the Regulatory Reform (Fire Safety) Order 2005, as clarified by the Fire Safety Act 2021, puts the duty on the responsible person to keep fire doors suitable and maintained. Enforcement of fire safety law in Brixton sits with the London Fire Brigade.
For residential buildings in Brixton above 11 metres, regulation 10 of the Fire Safety (England) Regulations 2022 adds checks: communal fire doors at least every three months and best-endeavours checks of flat entrance doors at least every twelve months. Higher-risk buildings of at least 18 metres or seven storeys also come under the Building Safety Act 2022, where works may need approval from the Building Safety Regulator.
Buildings and duty holders in Brixton
Typical settings for composite fire doors include housing association estates, converted flats and purpose-built blocks of flats. In Brixton, as anywhere, the duty holder varies: a responsible person for a workplace, a landlord or managing agent for a block or HMO, or a homeowner after building work. We adjust access, timing and paperwork to suit whoever commissions the work.
The steps on a Brixton installation
- Survey opening, threshold and exposure
- Agree colour, glazing and hardware within the certified range
- Order doorset to measure
- Remove existing door and frame
- Install, seal and adjust to the manufacturer's instructions
- Test closer and locks and hand over evidence
Guide prices in Brixton
Budget around £1,400–£2,600 per composite flat entrance doorset supplied and fitted, ex VAT for composite fire doors. Our guide prices are the same in Brixton as elsewhere; what changes the cost is the doors themselves. Use our guide-price tool for a quick estimate.
Around Brixton
Neighbouring towns such as Peckham, Pimlico, Battersea and City of Westminster are covered too, so clients with several buildings can use one installer and one evidence format.
Questions
Is Brixton within your coverage area?
It is. We cover Brixton in Greater London and neighbouring towns such as Peckham. There is no charge for the survey.
Do I need to be there for the survey?
Someone needs to give us access to the doors. For blocks and commercial buildings, a caretaker or site contact is fine; for HMOs and homes, we agree a time with you or your tenants.
Do composite fire doors need a closer?
Yes, as flat entrance doors they need a self-closing device that closes and latches them. This can be overhead or concealed, depending on the certified options.
Can composite fire doors face the weather?
Some are designed for external use on deck-access blocks. The product must be certified for that use and fitted with the right threshold and weather detailing.