Composite fire doors in Livingston: what's involved
We provide composite fire doors in Livingston (EH54 and the surrounding postcodes), from the first survey through to a documented handover.
Buildings in and around Livingston range from schools to family homes after loft conversions and houses with integral garages. Whatever the building, the standard is the same: certified products, correct gaps, seals and closers, and a frame sealed to the wall.
For deck-access blocks in and around Livingston, we specify composite doors certified for external use, with the right threshold detail. We only fit composite doors in Livingston in configurations covered by the product's certification.
What to check before you buy
Composite doors vary widely. The certification must cover the whole doorset as supplied: the core, skin, frame, glazing, letterplate, viewer and every item of hardware. Ask to see the certificate and the installation instructions, and check that the door's configuration, such as a side panel or glazed panel, is actually covered. BS 8214:2026 now includes maintenance guidance for composite and metal doors, reflecting how common they have become.
As standard, the work covers:
- Certificate reference and photo record
- Advice on certified composite products and options
- FD30S composite doorset made to measure
- Weather detailing for external deck-access doors
The regulations behind fire doors in Livingston
Livingston is in Scotland, which has its own system. Building work, including many fire door replacements, is governed by the Building (Scotland) Regulations 2004 and the Technical Handbooks, with Section 2 covering fire; where a building warrant is needed it comes from the local authority. In non-domestic premises, the Fire (Scotland) Act 2005 and the Fire Safety (Scotland) Regulations 2006 set the duties.
The common parts of private blocks of flats largely sit outside Part 3 of the 2005 Act, so the fire risk assessment and housing obligations usually drive fire door work in residential buildings in Livingston.
Where composite fire doors fit in Livingston
You are most likely to need composite fire doors if you look after purpose-built blocks of flats, converted flats or deck-access blocks. Whatever the building in Livingston, we survey each opening and tell you which doors need work and which do not.
From enquiry to handover in Livingston
- Survey opening, threshold and exposure
- Agree colour, glazing and hardware within the certified range
- Order doorset to measure
- Remove existing door and frame
- Install, seal and adjust to the manufacturer's instructions
- Test closer and locks and hand over evidence
What does composite fire doors cost in Livingston?
Budget around £1,400–£2,600 per composite flat entrance doorset supplied and fitted, ex VAT for composite fire doors. Our guide prices are the same in Livingston as elsewhere; what changes the cost is the doors themselves. Use our guide-price tool for a quick estimate.
Around Livingston
Nearby towns we cover include Bathgate, Dunfermline and Falkirk. Distance from Livingston does not change our guide prices, and the survey and quote are free.
Common questions
Is Livingston within your coverage area?
It is. We cover Livingston in Edinburgh & the Lothians and neighbouring towns such as Bathgate. There is no charge for the survey.
Can you work from an existing inspection report for my Livingston building?
Yes. Send it over and we can often price straight from it, then confirm on site. We report back against the same door references so you can close actions off.
Can I add a letterbox to a composite fire door?
Only if the letterplate is part of the certified doorset. Cutting one in afterwards would compromise the door's fire performance.
Do composite fire doors need a closer?
Yes, as flat entrance doors they need a self-closing device that closes and latches them. This can be overhead or concealed, depending on the certified options.