Composite fire doors in Long Eaton

What composite fire doors in Long Eaton should include

Looking for composite fire doors in Long Eaton? We supply and fit certified fire doors and components across Long Eaton and the wider Derbyshire area, working from a free survey and a fixed written quote.

Fire doors in Long Eaton protect escape routes in houses with integral garages, small offices and small blocks of flats alike. We adapt the programme to the building and its occupants, never the standard of the installation.

Composite doorsets are a popular option for flat entrance programmes, and in Long Eaton they suit blocks where residents want colour choice and low maintenance. We only fit composite doors in Long Eaton in configurations covered by the product's certification.

How we fit composite doorsets

Composite doorsets are installed strictly to the manufacturer's instructions, which typically set out fixing positions, packing, the sealing of the frame-to-wall gap and threshold details. We set the closer so that it closes and latches the door, test the locks and record everything for your files. Where a resident or freeholder chooses colours, we make sure the chosen option is within the certified range.

On a typical job that means:

• Self-closer, smoke and intumescent seals
• FD30S composite doorset made to measure
• Weather detailing for external deck-access doors
• Advice on certified composite products and options

The regulations behind fire doors in Long Eaton

In Long Eaton, as elsewhere in England, the starting point is the Fire Safety Order 2005: whoever controls a workplace or the shared parts of a residential block must make sure its fire doors work. When doors are replaced, the Building Regulations and Approved Document B set the standard the new work has to meet.

Blocks above 11 metres have a specific routine under regulation 10 of the Fire Safety (England) Regulations 2022: quarterly checks of communal fire doors and annual best-endeavours checks of flat front doors. If your Long Eaton building is a higher-risk building under the Building Safety Act 2022, we confirm the approval route with the Principal Accountable Person before any work is ordered.

Buildings and duty holders in Long Eaton

The need for composite fire doors usually arises in deck-access blocks or housing association estates, and sometimes purpose-built blocks of flats. Each has its own pressures, such as residents at home or a building that must stay open, so we plan the sequence of work in Long Eaton to keep escape routes protected throughout.

What happens after you enquire

1. Survey opening, threshold and exposure
2. Agree colour, glazing and hardware within the certified range
3. Order doorset to measure
4. Remove existing door and frame
5. Install, seal and adjust to the manufacturer's instructions
6. Test closer and locks and hand over evidence

Prices for composite fire doors in Long Eaton

As a guide, budget £1,400–£2,600 per composite flat entrance doorset supplied and fitted, ex VAT for composite fire doors. The figure for your Long Eaton building depends on the number of doors, the rating, the condition of the frames, finishes, hardware and access. We confirm a fixed price after the free survey.

Around Long Eaton

Long Eaton is about 14.0 km from Derby, and we cover both, along with nearby Ilkeston and Nottingham. Send us your postcode and we'll confirm survey dates.

Common questions