Communal fire doors in Catford, SE6

Communal fire doors in Catford, done to the evidence

Our communal fire doors service in Catford is simple: a survey, a fixed quote, certified products and an installation finished to the manufacturer's evidence.

Fire doors in Catford protect escape routes in student accommodation, shared houses and mixed-use office buildings alike. We adapt the programme to the building and its occupants, never the standard of the installation.

Communal corridors and stairs in Catford buildings take the heaviest use, so we choose finishes and hardware that keep working between checks. The evidence pack for each communal door in Catford is set out to support whatever checking regime your fire risk assessment sets.

How do you work in an occupied building?

Escape routes have to stay usable. We phase communal door work so that no stair or corridor is left without protection overnight, keep a doorset ready to fit before removing the old one, and agree working hours with the building manager. Where a hold-open device is needed, we coordinate with your fire alarm contractor for the release interface.

On a typical job that means:

• Evidence pack suitable for regulation 10 records
• Closers, coordinators and hold-opens as required
• Tested vision panels and durable finishes
• Certified single, double or leaf-and-a-half doorsets

What the rules say for Catford

The rules that apply to fire doors in Catford are England's. The responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire doors in non-domestic premises and the common parts of flats in working order; the Fire Safety Act 2021 confirmed that this includes flat entrance doors onto common parts. Enforcement of fire safety law in Catford sits with the London Fire Brigade.

Where a Catford block is above 11 metres, regulation 10 of the 2022 regulations means communal doors are checked every three months and flat entrance doors annually on a best-endeavours basis. Replacement doors must also satisfy the Building Regulations, with Approved Document B as the guidance most building control bodies work from.

Which buildings in Catford need communal fire doors?

Typical settings for communal fire doors include blocks of flats, sheltered and supported housing and hotels. In Catford, as anywhere, the duty holder varies: a responsible person for a workplace, a landlord or managing agent for a block or HMO, or a homeowner after building work. We adjust access, timing and paperwork to suit whoever commissions the work.

How a Catford job runs

1. Survey communal doors and plan a phased sequence
2. Agree working hours and resident notices with the client
3. Order doorsets to size with matching hardware
4. Replace doors one route section at a time
5. Commission closers and hold-opens with the alarm contractor
6. Hand over evidence for your fire safety records

Budgeting for communal fire doors in Catford

If you need a budget figure first, the guide for communal fire doors is from around £800 for a single communal doorset to £3,200 for a glazed pair, ex VAT. We firm that up after a survey, pricing each door separately so you can see where the money goes.

Nearby areas we cover from Catford

Neighbouring towns such as Blackheath, Greenwich, Beckenham and Peckham are covered too, so clients with several buildings can use one installer and one evidence format.

Questions