Commercial fire doors: our service in Reigate
When you book commercial fire doors in Reigate, the aim is simple: doors that close, latch and seal as tested, with records that prove it.
Buildings in and around Reigate range from care homes to schools and light industrial buildings. Whatever the building, the standard is the same: certified products, correct gaps, seals and closers, and a frame sealed to the wall.
For commercial buildings in Reigate, we coordinate access control and alarm interfaces before the doors arrive. Each commercial door we fit in Reigate gets a record your fire risk assessor can use straight away.
Access control and hold-opens
Modern offices and hotels often combine fire doors with access control, electric locks and hold-open devices linked to the fire alarm. Electric locking on an escape route has to release safely, and any holes, cables and devices in the door must be covered by the evidence. We coordinate with your security and fire alarm contractors on the interfaces.
As standard, the work covers:
- Glazed and solid options to certification
- Doorsets with veneer, laminate or paint finishes
- Per-door evidence for your fire risk assessment
- Hold-open devices linked to the fire alarm
What the rules say for Reigate
The rules that apply to fire doors in Reigate are England's. The responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire doors in non-domestic premises and the common parts of flats in working order; the Fire Safety Act 2021 confirmed that this includes flat entrance doors onto common parts.
Where a Reigate block is above 11 metres, regulation 10 of the 2022 regulations means communal doors are checked every three months and flat entrance doors annually on a best-endeavours basis. Replacement doors must also satisfy the Building Regulations, with Approved Document B as the guidance most building control bodies work from.
Where commercial fire doors fit in Reigate
The need for commercial fire doors usually arises in hotels or shops, and sometimes offices. Each has its own pressures, such as residents at home or a building that must stay open, so we plan the sequence of work in Reigate to keep escape routes protected throughout.
From enquiry to handover in Reigate
- Survey doors and agree priorities with the duty holder
- Specify doorsets, finishes and hardware
- Coordinate with security and alarm contractors
- Install in phases around operations
- Commission closers, locks and hold-opens
- Hand over the evidence pack
Guide prices in Reigate
As a guide, budget £750–£2,000 per commercial doorset, depending on finish and hardware, ex VAT for commercial fire doors. The figure for your Reigate building depends on the number of doors, the rating, the condition of the frames, finishes, hardware and access. We confirm a fixed price after the free survey.
Covering Reigate and nearby
We also cover towns near Reigate, including Redhill (2.5 km away), Horley and Banstead. If your building is in RH2 or a neighbouring district, the service and pricing are the same.
Questions from Reigate
Is Reigate within your coverage area?
It is. We cover Reigate in Surrey and neighbouring towns such as Redhill. There is no charge for the survey.
How quickly can you survey in Reigate?
It depends on the number of doors and access, but we offer survey dates as soon as we reply to your enquiry. If an inspection has found urgent safety issues, tell us and we'll prioritise.
Can you install fire doors outside business hours?
Yes. We regularly plan work for evenings, weekends or quiet periods so that offices, shops and hotels can keep running.
Can fire doors have access control?
Yes, if the electric locks, readers and cabling are covered by the door's certification and the locking releases safely for escape. We coordinate with your security contractor.