Commercial fire doors for Farnborough buildings
Looking for commercial fire doors in Farnborough? We supply and fit certified fire doors and components across Farnborough and the wider Hampshire area, working from a free survey and a fixed written quote.
Buildings in and around Farnborough range from HMOs to high-street shops and industrial estates. Whatever the building, the standard is the same: certified products, correct gaps, seals and closers, and a frame sealed to the wall.
For commercial buildings in Farnborough, we coordinate access control and alarm interfaces before the doors arrive. Each commercial door we fit in Farnborough gets a record your fire risk assessor can use straight away.
Access control and hold-opens
Modern offices and hotels often combine fire doors with access control, electric locks and hold-open devices linked to the fire alarm. Electric locking on an escape route has to release safely, and any holes, cables and devices in the door must be covered by the evidence. We coordinate with your security and fire alarm contractors on the interfaces.
Each installation includes:
- Access control and electric locking interfaces
- Doorsets with veneer, laminate or paint finishes
- Hold-open devices linked to the fire alarm
- Out-of-hours and phased working
Fire door law for Farnborough properties
In Farnborough, as elsewhere in England, the starting point is the Fire Safety Order 2005: whoever controls a workplace or the shared parts of a residential block must make sure its fire doors work. When doors are replaced, the Building Regulations and Approved Document B set the standard the new work has to meet.
Blocks above 11 metres have a specific routine under regulation 10 of the Fire Safety (England) Regulations 2022: quarterly checks of communal fire doors and annual best-endeavours checks of flat front doors. If your Farnborough building is a higher-risk building under the Building Safety Act 2022, we confirm the approval route with the Principal Accountable Person before any work is ordered.
Who needs commercial fire doors in Farnborough?
From hotels to restaurants, the requirement for commercial fire doors in Farnborough comes from the fire strategy or risk assessment for the building. We work from that document, or help you interpret your inspection report, before quoting.
What happens after you enquire
- Survey doors and agree priorities with the duty holder
- Specify doorsets, finishes and hardware
- Coordinate with security and alarm contractors
- Install in phases around operations
- Commission closers, locks and hold-opens
- Hand over the evidence pack
What does commercial fire doors cost in Farnborough?
If you need a budget figure first, the guide for commercial fire doors is £750–£2,000 per commercial doorset, depending on finish and hardware, ex VAT. We firm that up after a survey, pricing each door separately so you can see where the money goes.
Around Farnborough
Nearby towns we cover include Camberley, Aldershot and Fleet. Distance from Farnborough does not change our guide prices, and the survey and quote are free.
Common questions
Do you cover GU14 and nearby postcodes?
Yes. We cover Farnborough including GU14, and nearby towns such as Camberley and Aldershot. The survey and written quote are free.
Do I need to be there for the survey?
Someone needs to give us access to the doors. For blocks and commercial buildings, a caretaker or site contact is fine; for HMOs and homes, we agree a time with you or your tenants.
Who is responsible for fire doors in a commercial building?
The responsible person under the fire safety law for that nation, usually the employer, owner or occupier. Leases often share duties between landlord and tenant.
Can veneered fire doors match our interior?
Many certified doorsets come in a wide range of veneers and laminates, so matching an interior scheme is usually possible.