Commercial fire doors in Christchurch: what's involved
We provide commercial fire doors in Christchurch (BH6 and the surrounding postcodes), from the first survey through to a documented handover.
Fire doors in Christchurch protect escape routes in small blocks of flats, schools and light industrial buildings alike. We adapt the programme to the building and its occupants, never the standard of the installation.
For commercial buildings in Christchurch, we coordinate access control and alarm interfaces before the doors arrive. Each commercial door we fit in Christchurch gets a record your fire risk assessor can use straight away.
Access control and hold-opens
Modern offices and hotels often combine fire doors with access control, electric locks and hold-open devices linked to the fire alarm. Electric locking on an escape route has to release safely, and any holes, cables and devices in the door must be covered by the evidence. We coordinate with your security and fire alarm contractors on the interfaces.
What you get:
- Per-door evidence for your fire risk assessment
- Doorsets with veneer, laminate or paint finishes
- Glazed and solid options to certification
- Hold-open devices linked to the fire alarm
Fire door law for Christchurch properties
The rules that apply to fire doors in Christchurch are England's. The responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire doors in non-domestic premises and the common parts of flats in working order; the Fire Safety Act 2021 confirmed that this includes flat entrance doors onto common parts.
Where a Christchurch block is above 11 metres, regulation 10 of the 2022 regulations means communal doors are checked every three months and flat entrance doors annually on a best-endeavours basis. Replacement doors must also satisfy the Building Regulations, with Approved Document B as the guidance most building control bodies work from.
Buildings and duty holders in Christchurch
Typical settings for commercial fire doors include offices, gyms and leisure sites and restaurants. In Christchurch, as anywhere, the duty holder varies: a responsible person for a workplace, a landlord or managing agent for a block or HMO, or a homeowner after building work. We adjust access, timing and paperwork to suit whoever commissions the work.
The steps on a Christchurch installation
- Survey doors and agree priorities with the duty holder
- Specify doorsets, finishes and hardware
- Coordinate with security and alarm contractors
- Install in phases around operations
- Commission closers, locks and hold-opens
- Hand over the evidence pack
Budgeting for commercial fire doors in Christchurch
Budget around £750–£2,000 per commercial doorset, depending on finish and hardware, ex VAT for commercial fire doors. Our guide prices are the same in Christchurch as elsewhere; what changes the cost is the doors themselves. Use our guide-price tool for a quick estimate.
Covering Christchurch and nearby
Nearby towns we cover include Bournemouth, New Milton and Poole. Distance from Christchurch does not change our guide prices, and the survey and quote are free.
Common questions
Is Christchurch within your coverage area?
It is. We cover Christchurch in Dorset and neighbouring towns such as Bournemouth. There is no charge for the survey.
Do I need to be there for the survey?
Someone needs to give us access to the doors. For blocks and commercial buildings, a caretaker or site contact is fine; for HMOs and homes, we agree a time with you or your tenants.
Can fire doors have access control?
Yes, if the electric locks, readers and cabling are covered by the door's certification and the locking releases safely for escape. We coordinate with your security contractor.
Can veneered fire doors match our interior?
Many certified doorsets come in a wide range of veneers and laminates, so matching an interior scheme is usually possible.